Content: see parts list

incl. practical tool holder

with dissipative coating 10^5 ohm

for hanging or putting up

made of sturdy 1.5 mm sheet steel

extremely stable

tools always handy and clearly stowed

tools and holder are dissipative

measures 150 x 145 x 80 mm

weight 445 g, empty 270 g

EPA suitable for electrostatically protected areas (ESD workplace / ESD protection zone). For more order in the workplace. The VARIO tool holder was developed for the orderly suspension of pliers, tweezers and screwdrivers. This set offers the basic equipment of tools for working on simple electronic components.

The practical VARIO tool holder is made of sturdy 1.5 mm sheet steel and has a high-quality dissipative black powder coating. In addition to pliers and tweezers, our handy screwdrivers or round objects with a maximum diameter of 9 mm can also be stored. The recess in the lower area allows the blades or tips of the tools to be quickly identified and selected. The locking aid at the rear edge helps to hold each tool in position. Small noses on the upper edge of the suspension rail prevent pliers or tweezers from slipping down. The tool holder can be set up as well as hung. Two holes on the back allow easy mounting on the wall.

ESD tool kit VARIO consists off: 5-090-0 ESD tool holder VARIO 8 slots;3-604-15 ESD side cutters CLASSICline flush 115 mm;3-633-15 ESD snipe nose pliers CLASSICline not serrated jaws 120 mm;4-603 ESD screwdriver slot blade 1.5x0.25x60 mm;4-621 ESD screwdriver cross-recess PH000;5-055-13 ESD SMD tweezers 120 mm form 7a stainless steel angle 40° dissipative;5-068-13 ESD tweezers 120 mm form 13 stainless steel, dissipative