用于放置冷镶嵌和热镶嵌后的样品的扫描电镜钉形样品台，同时也可以放置相应尺寸的圆柱形样品。放入样品后用侧面的螺丝固定样品。
用于放置冷镶嵌和热镶嵌后的样品的扫描电镜钉形样品台，同时也可以放置相应尺寸的圆柱形样品。放入样品后用侧面的螺丝固定样品。
 
|
Metallographic Mount Holder, 1" and 25mmSpecimen holder for 1" and 25mm metallographic mounts. Standard pin stub 3.2mm (1/8"). Material: machined aluminum with stainless steel allen screws. Depth 8mm (5/16"). Allen wrench included. Shown holding a specimen, right. Screws used are M3 x 6mm Soc Cap, SS and M3 x 12mm Soc Cap, SS |
专业代理国外知名镊子品牌
我们将竭诚为你服务
0755-23003036
粤ICP备14069686号