PELCO^® 3mm Square Face Mold

for embedding larger specimens, uses less resin

With this mold a larger specimen may be placed in a wider tip area resulting in a larger initial section. Once solidified the block may be glued to the end of a plexiglas rod or other holding device. (See Mounting Cylinders.) Blue silicone rubber.
Maximum temperature: 218°C (425°F).

Number of Cavities: 30
Numbering: Outside of cavities, 1-30
Block Faces: 3 x 3mm
Mold Size: 61.5 x 72 x 6mm thick